|
^ pretty much sets you up with everything ud need...
I'd say make sure you cover the carpet and walls in the bedroom with plastic below any reflective materials you may want to put up to prevent the moisture from getting in walls and carpet causing mold....
As for going from indoor to out the main thing you need to realize is you control the plants environment and there are 4 main needs... Light (for photosynthesis) air water and food... When you get the air water and food right then you need to decide how much light you'll give them... That's the key factor... Meaning the less light the less possible end product... From personal experience a 250 watt light gave me 4 oz and a 600 gave me near 14 oz and a 1000 I'm not sure but would be a good size to go with in a whole bedroom or maybe 2 or 3 600w if the room is larger
metal halide is more in the blue spectrum which is similar to early summer sun... Whereas hps is more red like the fall sun... Metal halide will produce higher levels of thc but less solid dense nug... Hps is solid and newer hps bulbs are including a bit more blue to add to it... LEDs I hear are going to be the thing in the near future but not quite yet
as for fan and reflector maybe an air cooled hood which allows you to exhaust the heat of the light without heating up your room allowing you to get the light a bit closer making up for the glass screens lumen loss...
I use a can fan 6" 448 cfm (cubic ft per min) which has done the trick for me... Also a little charcoal filter will help as it will stink worse than I thought it would
I can go on for hours
|