YaHooka Forums - View Single Post

strainwreck · 11-09-2009, 12:32 PM

So what a weekend..

I tried to install my box according to my first post, but that didnt happen. I realized afterwards that the door to the bathroom is only 2ft wide, and the box is too big to get in. There is not enough room in the bathroom to assemble the cabinet. So the whole thing has been moved to the spare bedroom closet. I ordered my light this morning, 400 hps system that will be here by friday. I also picked up the carbon filters, 3" vent, and fan. need to goto the nursery today and get my FoxFarm Light Warrior and mylar to line the box with.

So heres what Ive got so far..

Cabinet: 24 x 32 x 66 = 5 1/3 SQ/FT
Lighting: 400w HPS
Venilation:
-Vent Fan: 4in 130cfm fan raised 1"
-Intake Fan: 4x 60mm 20cfm fans w/ 4in passive intake
Odor: 3" vent stack to home made 3 layer carbon filter (2 carbon 1 dust)

Here are some rough pics of the cabinet, needs to be painted and mylar lined on the inside. The door, I did a slight miscalculation and cut the door to the full height of the box (instead of leaving a intake hole at the bottom), so I just mounted it higher up on the hinges to leave the gap, I may fix it later.

11-09-2009, 12:32 PM	#15 (permalink)
strainwreck YaHookan Join Date: Nov 2009 Posts: 33 Thanks: 7 Thanked 5 Times in 4 Posts	So what a weekend.. I tried to install my box according to my first post, but that didnt happen. I realized afterwards that the door to the bathroom is only 2ft wide, and the box is too big to get in. There is not enough room in the bathroom to assemble the cabinet. So the whole thing has been moved to the spare bedroom closet. I ordered my light this morning, 400 hps system that will be here by friday. I also picked up the carbon filters, 3" vent, and fan. need to goto the nursery today and get my FoxFarm Light Warrior and mylar to line the box with. So heres what Ive got so far.. Cabinet: 24 x 32 x 66 = 5 1/3 SQ/FT Lighting: 400w HPS Venilation: -Vent Fan: 4in 130cfm fan raised 1" -Intake Fan: 4x 60mm 20cfm fans w/ 4in passive intake Odor: 3" vent stack to home made 3 layer carbon filter (2 carbon 1 dust) Here are some rough pics of the cabinet, needs to be painted and mylar lined on the inside. The door, I did a slight miscalculation and cut the door to the full height of the box (instead of leaving a intake hole at the bottom), so I just mounted it higher up on the hinges to leave the gap, I may fix it later.