Krunk

I had this little vial that had a gram and a half of hash oil in it. It's empty, for the most part, but there is still a little bit of oil all around the edges, and I'm positive that there's more than enough to get a couple people high. I'm only concerned about getting one more high out of it though.

How do you all think I should extract this oil? Here's my ideas:

1) Cut it open (?) and scrape it. The vial is extremely hard plastic, so this might be hard. Plus, if I can cut into it, I might get some of the little remaining oil on the scissors which would be a pain.
2) Open the vial and put it and the top in a pan with some boiling milk. I feel like the heat and liquid would get the oil out of the jar for the most part. I could then remove the plastic before it started melting and simmer this at a medium heat for a while then drink it.
3) Uhhhh. This is where you come in.

Give me some ideas plz.

__________________
never been truer words

Rubix

all would work, of course. but i would recommend number 3, just so you can report back how it was

__________________

Krunk

Its in a pan with milk right now chillin there.

I just realized, I could've probably let it soak in a shot glass with vodka. Then I wouldn't have to deal with heating it and worrying about the plastic melting and what not. I tried to grab it out hoping I could save the operation, but some greenish/brown milk splashed out of the vial when I tried to pick it up. I guess I'm stuck with this shitty milk idea.

__________________
never been truer words

Rubix

lol, whole milk?

__________________

~1~

2%

__________________

Krunk

I'm a retard and didn't check that out before hand. Luckily its whole milk.

It smells like cannabutter. Thats a good thing.

__________________
never been truer words

Rubix

i assume you need quite a bit of milk to "absorb" all the thc from the oil?

__________________

Krunk

It was only about 2 "hits" of oil, so I used just enough milk to cover the little jar in the pan. It boiled down a little, and right now its sitting in my mug. My first sip I got some funky greenish film in my mouth. It tasted like cannabutter, but had a gross consistency. The rest is pretty tasty.

__________________
never been truer words

stoner_logic

is the opening big enough to stuff a bud in there? just do that and scrape it around to get all the oil on the bud and have a super potent dank oil-bud.

__________________

Krunk

Well, the milk worked.

__________________
never been truer words

jag8

hmmm... would you recomend this method? i personaly have only seen hash oil smoked with hot knifes.

Krunk

It works well if the bottle is too empty to do this:

__________________
never been truer words

Grieves

I know it's too late but the right way to do that is...

1. Heat the oil up through the vial with a lighter/hot water(if container is plastic) so it becomes a liquid..

2. Get a paperclip and straighten it out...

3. Stick the paperclip into the liquid and start to gather a ball at the end of the clip, it will start to dry onto the paperclip.

4. Take a lighter and "push" the ball off of the end of the clip, and let drop onto bowl...

5. Get high

__________________

Krunk

One time my friend and I had a similar little jar of honey oil. It was near empty, and hard to get the last goodness out of it, so we opened the lid and put it on the stove.

We've got this little glass vial heating on the stove, and we're they're with a straw, hitting this shit for a little bit. You could feel the high instantly. Oil is like the crack of THC. All of a sudden, the vial filled with this really thick smoke as my buddy is taking his turn. He starts coughing and shit. Oops, that vial wasn't glass. Tough luck bud, sorry about the lungful of toxins. We got high as shit, regardless.

__________________
never been truer words

verklingen

So, buy a tina pipe when you next procure oil. Sounds awesome.

__________________

“Be kind, for everyone you meet is fighting a hard battle.”